UniMac Heated-Roll Flatwork Finisher/Ironer

SELECTING THE PROPER SIZE

While our units are available with 10″ or 13″ or 20″ diameter rolls, selecting the proper size will make the job easier. The larger the diameter of the roll, the faster the operating speed since the linen is in more contact with the heated surface. The ironer’s finishing length should be slightly larger than the width of the linen you will finish. Most linens for tables of four will require a 63″ width. If finishing sheets or banquet tablecloths, you may require a 126″ width.

ENERGY EFFICIENT

Our low Btu consumption ratings will save you money. To maintain the heat on the steel roll that presses the linen, we use thicker steel for a more consistent temperature. While the heat is produced near the top of the unit, we place our exhaust fans toward the bottom to remove less heat from the roll. In combination with this, we totally enclose the entire cabinet to maintain more insulation around the heated roll. Our 300º angle of contact allows the linens a longer contact with the heated roll, allowing less energy to be consumed.

SAFETY FEATURES

Designed to be as safe as possible, a stop bar prevents operators from placing their hands too close to the machine, and a sophisticated alarm system indicates when any of the components are not working properly. If the machine’s power is interrupted when a linen is being processed, the linen must be removed or it risks damage. We provide a manual crank to easily remove the linen before it is damaged.

OTHER USER-FRIENDLY FEATURES INCLUDE:

• Feeding tray to assist in feeding napkins or longer items.
• Our nomex feed belts are designed to last longer and always look good.
• Our nomex ironing belts are connected with staples and include a nomex covering to protect your linens from damage.
• The compact design allows for the unit to be installed just inches from the back wall.

Please fill out this form for a callback about your order:

Please call us at 604 325 3281

text